Input leads are 18 AWG. Output leads are 12 AWG.

Lead insulation is 105 °C.

The transformer uses a class B 130 °C insulation system.

 

Enclosure temperature will not exceed 70 °C @ 40 °C ambient.
Wiring compartment has 4 knockouts sized for 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by clips.
The enclosure is black powder coated.
 

• Manual reset thermal circuit breaker on the secondary side.
• Dimmable with all dimmers that provide a symmetrical form
   of current wave under any conditions.
• ETL listed
• CSA listed
• UL standard M300404
• NEMA 3R enclosure

 

Max Load: ------------------------- 300 W
Input Voltage: ---------------------- 120 V 60 Hz
Output Voltage Full Load:  --------- 11.5 V min. 12.5 V min. Boost
Input Current Full Load: ------------ 2.5 A
Open Circuit Volts: ----------------- 12.5 V. 13.5 V Boost
Open Circuit Current: --------------- 0.4 A
Output Current Full Load: ----------- 25 A max
Efficiency: --------------------------- 92%
Coil Former: ------------------------ Double Section Bobbin
Thermal Class: ---------------------- B 130 °C
Leads Primary: ---------------------- PVC 600 V #18
Leads Secondary:-------------------- PVC 300 V #12