The actual transformer is encapsulated in the enclosure.
Input leads are 20 AWG. Output leads are 16 AWG.

Lead insulation is 105 °C.

 

Enclosure temperature will not exceed 70 °C @ 40 °C ambient.
Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by a screw.
The enclosure is black powder coated.

 

• Manual reset thermal circuit breaker on the secondary side.
• Controlled with a low-voltage dimmer.
• ETL listed
• CSA listed
• UL standard 5085-1

 

Max Load: --------------------- 20 W
Input Voltage: ------------------ 120 V 60 Hz
Output Voltage Full Load: -------11.4 V
Input Current Full Load: ---------206 mA
Open Circuit Volts: --------------12.5 VDC
Output Current Full Load: -------1.6 A
Efficiency: -----------------------85.70%
Coil Former: ---------------------Double Section Bobbin
Thermal Class B: ----------------130 °C
Leads Primary: ------------------PVC 600 V #20
Leads Secondary: ---------------PVC 300 V #16

 

LED Magnetic Transformers are built especially for LED systems. They provide the following benefits:

 

Compatibility - These LED Magnetic Transformers have no minimum load requirements. They cause no flicker or any of the other side effects that can result from a lack of synchronization between voltage mode drivers and PWM low voltage drivers in the light fitting.

 

Perfect Dimming - These LED Magnetic Transformers are fully compatible with low voltage dimmers, in contrast to voltage mode drivers that balance the voltage in the system and prevent the dimmer from working.

 

Lower power consumption - These LED Magnetic Transformers bring about an improvement in efficiency of 15%, due to the avoidance of unnecessary double conversion in the circuitry.

 

No RFI issues - These LED Magnetic Transformers operate at a perfect 60Hz sinus wave and so produce no radio frequency interference whatsoever.

 

Compact Size - These LED Magnetic Transformers are much smaller than standard magnetic transformers, use less power - working on outputs as small as 15W - and can even be placed inside lighting fixtures.